Live engine data for 1990s Subaru engines, VW Vanagon swaps and Porsche kit cars
SSMLink reads live data and trouble codes from 1990–1996 Subaru engine computers (ECUs) through the yellow Select Monitor connector, using a small ESP32 Bluetooth adapter. It’s made for Subaru-powered conversions such as EJ22 swaps in VW Vanagons and Porsche 356/550 replica kit cars, and works on stock 1990s Legacys, Imprezas and SVXs too.
Ready-made adapters are coming. Reserve one here: it’s free, and nothing is charged until they’re ready.
Questions, bug reports and adapter build help: nickma@gmail.com. You can also send feedback from the About screen in the app (Parameters › About SSMLink).
Open the app and tap Try the demo ECU on the Live tab. A simulated 1993–94 EJ22 runs a one-minute drive loop, so every screen works without the adapter.
The app says “No adapter connected”. Plug the adapter into the yellow diagnostic connector, switch the ignition on (engine running or not), and tap Connect. The adapter needs 12 V from the connector.
Connected, but no reply from the ECU. Check the ignition is on and the plug is fully seated. The green test-mode and black read-memory connectors should be apart.
Values look wrong. Read the ROM ID on the Live tab so SSMLink picks the matching address map. If your ROM has no exact map, compare RPM and coolant against your gauges.
Values update slowly. A 1990s ECU answers about five values per second. Select fewer parameters on the Parameters tab for faster updates.
mph or km/h, °F or °C? Tap the gear on the Live tab and choose US or Metric units.
Where are my recordings? On iPhone in the Files app (On My iPhone › SSMLink); on Android in Downloads › SSMLink. Both can be shared from the Live tab.
SSMLink collects no personal data. See the privacy policy.